***Please Note – This Enclosure Is Only For The Brahma 15″ Mk2.5 Rev A***

• 2.5 cubic feet net enclosure
• 14.00″ subwoofer cut out
• 1″ baffle
• 13 ply birch veneer construction
• Gray stained finish
• Pre-wired metal binding post
• T Nuts with all hardware included

Dimensions/Weight:

• 18.75″ tall
• 18.75″ wide
• 14.875″ deep
• Enclosure weight – 30 lbs
• Shipping weight – 35 lbs

The post Branded Series – Single 15″ 2.5 Cf Net Sealed Enclosure appeared first on Adire Audio.

• 1.6 cubic feet net enclosure
• 34 hz tuning
• 21 sq inches of port
• 10.5″ x 2″ port dimensions
• 7.375″ subwoofer cut out
• 3/4 inch (18mm) plywood construction
• 3/4 inch (18mm) baffle brace
• 13 ply birch veneer construction
• Gray stained finish
• Pre-wired metal binding post with 10ga OFC

Dimensions/Weight:

• 12” tall
• 23.875” wide
• 17” deep

At Adire Audio the goal with the “performance series” enclosures is to offer a well build, well performing and good looking enclosure at an affordable price. Using premium 18mm Baltic Birch all around with a baffle brace for added baffle strength, we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our baffle brace the enclosure is strong enough to handle subwoofer setups up to 1500W. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.

The post Performance Series – Dual 8″ 1.6 Cf Net Ported Enclosure appeared first on Adire Audio.

***Please Note – This Enclosure Is Only For The Brahma 12″ Mk2.5 Rev A***

• 1.125 cubic feet net enclosure
• 11.375″ subwoofer cut out
• 1″ baffle
• 13 ply birch veneer construction
• Gray stained finish
• Pre-wired metal binding post
• T Nuts with all hardware included

Dimensions/Weight:

• 16″ tall
• 16″” wide
• 11.375″ deep
• Enclosure weight – 22 lbs
• Shipping weight – 26 lbs

See full catalog

The post Branded Series – Single 12″ 1.125 Cf Net Sealed Enclosure appeared first on Adire Audio.

• 2.5 cubic feet net enclosure
• 33 hz tuning
• 42 sq inches of port
• 14″ x 3″ port dimensions
• 9.375″ subwoofer cut out
• 3/4 inch (18mm) plywood construction
• Solid 1” (24mm) baffle for ultimate strength
• 13 ply birch veneer construction (1” Baffle 17 ply)
• Gray stained finish
• Pre-wired metal binding post with 10ga OFC

Dimensions/Weight:

• 15.5” tall
• 29.25” wide
• 18” deep

At Adire Audio the goal with the “performance series” enclosures is to offer a well build, well performing and good looking enclosure at an affordable price. Using premium 18mm Baltic Birch all around with a 1” baffle for added baffle strength, we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1” baffle the enclosure is strong enough to handle subwoofer setups up to 3000W. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.

The post Performance Series – Dual 10″ 2.5 Cf Net Ported Enclosure appeared first on Adire Audio.

• 3.5 cubic feet net enclosure
• 30 hz tuning
• 46.5 sq inches of port
• 15.5″ x 3″ port dimensions
• 14.125″ subwoofer cut out
• 3/4 inch (18mm) plywood construction
• Solid 1” (24mm) baffle for ultimate strength
• 13 ply birch veneer construction (1” Baffle 17 ply)
• Gray stained finish
• Pre-wired metal binding post with 10ga OFC

Dimensions/Weight:

• 17” tall
• 29.5” wide
• 20” deep

At Adire Audio the goal with the “performance series” enclosures is to offer a well build, well performing and good looking enclosure at an affordable price. Using premium 18mm Baltic Birch all around with a 1” baffle for added baffle strength, we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1” baffle the enclosure is strong enough to handle subwoofer setups up to 3000W. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.

The post Performance Series – Single 15″ 3.5 Cf Net Ported Enclosure appeared first on Adire Audio.

• 4.00 cubes net
• 32 hz tuning
• 60.75 sq inches of port
• 13.5″ x 4.5″ port dimensions
• 11.125″ subwoofer cutout
• 3/4″ (18mm) birch plywood construction
• Solid 1″ (24mm) baffle for ultimate construction
• 3/4″ (18mm) center baffle brace
• 13 ply birch veneer construction (1″ baffle 17 ply)
• Gray stained finished
• Pre-wired metal binding post with 10ga OFC wire

Dimensions/Weight:

• 15″ tall
• 34″ wide
• 22.875″ deep
• Enclosure Weight – 61 lbs
• Shipping Weight – 71 lbs

See full catalog

The post Performance Series – Dual 12″ 4.0 Cf Net Ported Enclosure v2 appeared first on Adire Audio.

• 1.25 cubic feet net enclosure
• 33 hz tuning
• 20.3125 sq inches of port
• 12.5″ x 1.625″ port dimensions
• 9.375″ subwoofer cut out
• 3/4 inch (18mm) plywood construction
• Solid 1” (24mm) baffle for ultimate strength
• 13 ply birch veneer construction (1” Baffle 17 ply)
• Gray stained finish
• Pre-wired metal binding post with 10ga OFC

Dimensions/Weight:

• 14” tall
• 20.875” wide
• 15” deep

At Adire Audio the goal with the “performance series” enclosures is to offer a well build, well performing and good looking enclosure at an affordable price. Using premium 18mm Baltic Birch all around with a 1” baffle for added baffle strength, we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1” baffle the enclosure is strong enough to handle subwoofer setups up to 3000W. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.

The post Performance Series – Single 10″ 1.25 Cf Net Ported Enclosure appeared first on Adire Audio.

• 2.0 cubic feet net enclosure
• 32 hz tuning
• 31.5 sq inches of port
• 14″ x 2.25″ port dimensions
• 11.125″ subwoofer cut out
• 3/4 inch (18mm) plywood construction
• Solid 1” (24mm) baffle for ultimate strength
• 13 ply birch veneer construction (1” Baffle 17 ply)
• Gray stained finish
• Pre-wired metal binding post with 10ga OFC

Dimensions/Weight:

• 15.5” tall
• 24.875” wide
• 17” deep

At Adire Audio the goal with the “performance series” enclosures is to offer a well build, well performing and good looking enclosure at an affordable price. Using premium 18mm Baltic Birch all around with a 1” baffle for added baffle strength, we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1” baffle the enclosure is strong enough to handle subwoofer setups up to 3000W. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.

The post Performance Series – Single 12″ 2.0 Cf Net Ported Enclosure appeared first on Adire Audio.